CudaEye Support

Configuring your camera

CudaEye needs very little configuration. You should assign a name, set the timezone, focus the camera, and flip the image if you hung the camera from the ceiling.

To change your camera setting, roll over the bottom of the camera control and click SETTINGS. On the settings screen the landing screen allows you to change required information. The ADJUST FOCUS AND ROTATION button puts the camera in focus assist mode and allows you to flip the image. The Details tab allows you to adjust various properties of video, bandwidth, and motion detection. The Alert tab lets you configure reception of Alert and emails from CudaEye. The Network tab is where you modify camera IP settings like IP address and port.